Is composed of a polycrystalline CBN layer and a tungsten carbide
substrate, PCBN with a little poor on hardness & abrasion
resistance than PDC, but with extremely high thermal stability
and chemical interness to ferrous metals. For machining cobalt
and nickel based alloys difficult to cut(harder than HRC35) and
case-hardened steel
1, Round Series |
| D(mm) |
19.00 |
19.00 |
13.30 |
13.30 |
12.70 |
12.70 |
10.00 |
10.00 |
9.50 |
| H(mm) |
3.18 |
1.60 |
3.18 |
1.60 |
3.18 |
1.60 |
3.18 |
1.60 |
3.18 |
2, Sector Series |
| L(mm) |
6.50 |
4.50 |
3.50 |
Angle (a) |
| H(mm) |
1.60 or 3.18 |
45, 60, 90,180 |
3, Triangle Series |
| L(mm) |
7.0 |
50 |
3.8 |
Angle (a) |
| H(mm) |
1.60 or 3.18 |
60, 90 |
4, Rectangle Series |
L(mm) |
8.0 |
7.0 |
4.0 |
W(mm) |
7.0 |
5.0 |
3.0 |
H(mm) |
1.60 or 3.18 |
Polycrystalline CBN Cutting Inserts(PBCS)
1, Triangle Series |
|
D(mm) |
6.35 |
6.35 |
6.35 |
6.35 |
R(mm) |
1.6 |
1.2 |
0.8 |
0.4 |
L(mm) |
11.0 |
H(mm) |
3.18 |
2, Rectangle Series |
กก  |
D(mm) |
12.7 |
12.7 |
9.52 |
9.52 |
9.52 |
| R(mm) |
1.6 |
1.2 |
1.6 |
1.2 |
0.8 |
| L(mm) |
12.7 |
12.7 |
9.52 |
9.52 |
9.52 |
| H(mm) |
3.18 |
3, Rhombus Series |
กก  |
D(mm) |
9.52 |
9.52 |
9.52 |
| R(mm) |
1.6 |
1.2 |
0.8 |
| L(mm) |
9.70 |
9.70 |
9.7 |
| H(mm) |
3.18 |
4, Round Series |
|
D(mm) |
15.88 |
12.7 |
9.52 |
| H(mm) |
4.76 |
3.18 |
3.18 |
|
BSI:9001:2000 Hold certificate no:FS518717
Emailtome:shansun@shansun.com